EXOPLANET DISCOVERY LAB

  • Post category:Geology
  • Reading time:9 mins read

EXOPLANET DISCOVERY LAB

EXOPLANET DISCOVERY LAB
EXOPLANET DISCOVERY LAB

Geology Homework Help

INSTRUCTIONS

Please fill in the graph and questions. It can be 3 to 4 sentences per question.

Values are done! just need a graph and answers

In this lab, you will be learning about transit photometry, a method commonly used to discover planets outside our solar system. Please write your answers in the boxes that are provided. You also will be asked to complete several graphs. You may either draw directly on your word document using the Draw tab in the ribbon menu of your iPad Word app, or print, complete your assignment by hand, and scan your document for submission.

INTRODUCTION

Exoplanets are planets found outside our solar system orbiting stars other than our sun. The Kepler space observatory was launched by NASA in 2009 to aid in the discovery of exoplanets. More specifically, the Kepler Mission is designed to find near-Earth size planets that reside within a star’s Goldilocks zone. The ultimate goal is to identify exoplanets that are potentially habitable—though, Kepler cannot detect whether an exoplanet is actually inhabited.

Kepler fulfills this mission by searching for planetary transits. Let’s consider an example to understand the concept of transiting. Imagine you are looking into the beam of a brightly lit flashlight. Now, imagine that a small bug flies between you and the flashlight. The beam will be dimmer, perhaps imperceptibly, to your eyes. Scientists can measure the change in the brightness of light due to the transit of the bug. Similarly, when a planet passes in front of a star as viewed from Earth, the event is called a planetary transit (see Figure 1). When such transits occur, the star’s brightness also dims.

Figure 1. Like the change brightness given from the flashlight in our example, scientists can also measure the change in brightness given from a star during a planetary transit. To give you a better idea of what this looks like, consider the image above of the 2012 Venus transit across the Sun. The small dots show Venus’s path as it passed between the Earth and the Sun. For observers on Earth, the sun’s brightness measurably dipped on that day. Credit: NASA/SDO

The changes in brightness are graphed on a light curve, where time is graphed on the x-axis and brightness is on the y-axis. Before the transit, the brightness is measured as 100%; meaning the observer sees the star giving off its normal, maximum amount of light. However, once the transit begins, the brightness decreases. This continues until the planet passes, and the brightness reverts to its maximum (see Figure 2). View a NASA animation showing the construction of a light curve in real time.

Figure 2. Light curve of a transiting star. In reality, light curves do not look quite so smooth. Click here to see the first light curve captured for an exoplanet.

Light curves are rich in information. For example, scientists can figure out how close a planet is to its star based on its transit time. Johannes Kepler’s laws of planetary motion state that distant planets, those with large orbits, move more slowly about their sun than those that are close. So, a slower transit indicates the planet is further from its star. The mass of the star can also be derived based on the magnitude of the dip in the brightness curve. Taken together, distance and mass point to whether the exoplanet of the right size and distance to reside within the Goldilocks zone, meaning it could potentially harbor life. Repeated transits are identified as candidate exoplanets for further investigation. As of August 2017, the Kepler space observatory has identified 2,337 confirmed exoplanets and an additional 4,496 candidate exoplanets. Those that are confirmed, are of near-Earth size, and lie within their star’s Goldilocks zone dwindles to just 30 planets.

HYPOTHESES

For the following questions, draw your answers on the provided graphs and explain your reasoning in the blank boxes.

1. Compared with the graph above, what will the brightness curve look like for a larger planet?

2. Explain the reasoning behind your predicted curve.

The reason behind the shape of the graph is that a larger size planet obscures more of the star’s surface during a full eclipse and so the dip in intensity is more significant in its case.

3. What will the brightness curve look like for an exoplanet that has a shorter orbital period?

4. Explain the reasoning behind your predicted curve.

RESULTS AND ANALYSIS

The following tables represent idealized data collected from a photometer, a light meter, focused on a set of stars every 4 hours over a period of 36 hours. You will use these data to calculate the % brightness and plot these data in the provided graphs. To calculate the brightness, use the initial value for comparison. Each additional reading will be divided by the initial value (the photometer reading taken at time zero). To obtain the percentage, multiply by 100. (NOTE: These data show magnitude changes in brightness much larger than would be observed. Once you’ve completed the lab, try to think about why these data may not be realistic).

So, % brightness = (measured value at each time point/initial value) x 100%

Then you will answer the questions about each graph in the subsequent boxes.

STAR 1
Time (in hours) Measured value % brightness
0 (Initial) 56448 (56448/56448) x 100 = 100%
4 56438 (56438/56448) x 100 = 99.98%
8 53938 (53938/56448) x 100 = 95.55%
12 34912 (34912/56448) x 100 = 61. 84%
16 27044 (27044/56448) x 100 = 47.91%
20 20976 (20976/56448) x 100 = 37.16%
24 29045 (29045/56448) x 100 = 51.45%
28 50784 (50784/56448) x 100 =89.96%
32 54618 (54618/56448) x 100 =96.76%
36 56438 (56438/56448) x 100=99.98%

 

 

STAR 2
Time (in hours) Measured value % brightness
0 (Initial) 56443 100%
4 56468 100.4%
8 56453 100.02%
12 56453 100.02%
16 56458 100.03%
20 56453 100.02%
24 56458 100.03%
28 56443 100.00%
32 56463 100.04%
36 56448 100.01%

 

 

STAR 3
Time (in hours) Measured value % brightness
0 (Initial) 56458 100%
4 53703 95.12%
8 19734 34.95%
12 50819 9.01%
16 56458 100%
20 53703 95.12%
24 19734 34.95%
28 50819 9.01%
32 56468 100.02%
36 53718 95.15%

 

 

STAR 4
Time (in hours) Measured value % brightness
0 (Initial) 56468 100%
4 56468 100%
8 3615 6.40%
12 9939 17.60%
16 7554 13.38%
20 471 0.83%
24 496 0.88%
28 28491 50.45%
32 56468 100%
36 56463 99.99%

 

DISCUSSION

5. What is the difference between the planets orbiting around stars 1 and 3? Specifically refer your results to support how you arrived at your conclusion.

6. What is the difference between the planets orbiting around stars 1 and 4? Specifically refer your results to support how you arrived at your conclusion.

7. What can you conclude about star 2? Why didn’t we observe a transit? (Hint: there is more than one possible explanation!)

8. The orientation of a planet’s orbit can also affect its light curve. Consider the following example. Compared with the upper transit, what would the light curve look like for an orbit that is shifted with respect to its viewer? You may draw both curves on the provided graph to show contrast. Be sure to either use different colors or dashes to distinguish the two lines.

9. Explain the reasoning behind your predicted curve.

_____________________________________________